Skip to content

Accounts payable, from invoice
to payment run.

Accounts payable automation runs the whole process after a supplier invoice arrives: capture, matching to orders and deliveries, coding, approvals, posting to your accounts package, payment preparation and supplier queries. People keep control of approvals, bank detail changes and the payment run. Irish VAT and e-invoicing rules shape the design.

What does accounts payable automation cover?

Our invoice processing page covers reading an invoice and posting it. Accounts payable (AP) is the whole process around it. Capture is often the easy part. The time goes on chasing approvals, answering suppliers and preparing payments.

The accounts payable process and what automation does at each step
StepWhat automation doesWhat a person does
CaptureReads invoices from a mailbox, upload or e-invoice networkNothing, unless it cannot read one
MatchMatches to purchase order and goods received noteResolves differences outside tolerance
CodeProposes nominal, VAT rate, cost centreConfirms for new suppliers and unusual lines
ApproveRoutes by amount, department or supplier; sends remindersApproves or rejects
PostCreates the bill in the accounts package with the original attachedReviews the exception list
PayPrepares a payment proposal by due date and discountApproves and releases the payment run
Supplier queriesAnswers “has my invoice been paid?” from the ledgerHandles disputes and complaints

Is accounts payable automation a job for an agent?

Fit check

Tick what is true of your accounts payable automation work.

Tick the statements that apply and the suggestion appears here: an AI agent, ordinary automation, or a person with software support.

How do matching and approvals work in a small business?

Many SMEs do not raise purchase orders for everything. That is fine. Split suppliers into three groups and treat each differently:

  • Order-based suppliers (stock, materials, subcontractors): match to a PO and, where you record deliveries, to the goods received note. This is three-way matching.
  • Recurring suppliers (rent, software, utilities, insurance): no PO. Check the amount against the last invoice and a contract value, and flag changes over a set percentage.
  • One-off spend: route to the budget holder for approval, with the coding proposed.

Approval rules should copy your existing finance policy. Typical rules are based on amount bands, department and whether the supplier is new. The system sends the approver the invoice, the match result and the proposed coding in one message, by email, Teams or Slack, and approves with one click. It sends a reminder after a set time and escalates after a second one.

Approval by message is where most of the time saving comes from. In many small firms, the slow step is not the typing. It is the invoice waiting in a manager’s inbox for two weeks.

Which accounts packages can it post to?

Posting to common accounts packages in Ireland
PackageHow bills are postedNotes
XeroAccounting API: create bills with attachments, read suppliers and tracking categoriesHas its own bill capture, which an agent can feed or extend
QuickBooks OnlineAccounting API: bills, vendors, classes and locationsCheck which features your plan includes
Sage Business Cloud AccountingCloud API: purchase invoices and contactsDifferent from Sage 50 desktop
Sage 50 (desktop)Local SDK or an import file, depending on the versionUsually needs a small connector on a local PC or server
Sage IntacctWeb services API: bills, dimensions and approvalsSuits multi-entity groups; has its own AP approval features

See our Xero, QuickBooks and Sage pages for what each integration can and cannot do. Custom AP automation adds the most value with PO matching, several approvers or several entities.

How much time could accounts payable automation give back?

Estimate

Put your own numbers in.

The starting values are an illustrative example, not a benchmark or a neu figure. Use your own volume, the time each one takes today and the share you expect the system to handle without a person.

Hours back each month30
Value of that time€900
Over a year€10,800

Time saved is only part of the case: response times, missed work and errors matter too. The ROI guide covers how to set a baseline, and the cost guide what the build and running costs include.

Which Irish VAT points should the process handle?

This section is a practical guide, not tax advice. Have your accountant confirm the VAT coding rules before they are automated.

  • Valid VAT invoice. Revenue lists what a VAT invoice must show, including the date of issue, a unique sequential number, the supplier’s name, address and VAT number, the customer’s name and address, the goods or services, the VAT-exclusive price, the VAT breakdown by rate and the total VAT. The system can check that these fields are present before the invoice is posted.
  • Reverse charge. For reverse charge supplies, the invoice must show the customer’s VAT number and the words “reverse charge applies”, and no VAT amount. The system should recognise these and code them correctly, not treat them as zero-rated.
  • Relevant Contracts Tax (RCT). In construction, a principal contractor must notify Revenue of a payment to a subcontractor before paying it and then follows the deduction authorisation Revenue issues, at 0%, 20% or 35%. AP automation must hold these payments until the authorisation is in place. RCT invoices do not carry the reverse charge wording that other reverse charge supplies do.
  • Records. Revenue guidance is to keep VAT records for six years, with longer periods in some cases. Keep the original invoice, the approval record and the audit trail together.

What does Irish e-invoicing change for AP?

Revenue has published a phased plan for e-invoicing and real-time VAT reporting:

Revenue’s e-invoicing phases (as published)
DateWho is affectedWhat changes
1 November 2028Large corporates managed by Revenue’s Large Corporates Division; all businesses for receivingE-invoicing and real-time reporting for domestic B2B; all businesses must be able to receive e-invoices
1 November 2029VAT-registered businesses in cross-border EU B2B tradeThe domestic obligation extends to them
July 2030All Member StatesEU VAT in the Digital Age (ViDA) rules for cross-border B2B

For a small business, the first practical change is on the receiving side. From 1 November 2028, you must be able to receive structured e-invoices from suppliers who are required to send them. Check now whether your accounts package or AP tool can receive them, and plan for a mix of e-invoices and PDFs for some years. Revenue’s pages describe the plan; check them for updates before you make decisions.

E-invoices make capture easier, because the data arrives structured. They do not remove the need for matching, approvals or fraud checks.

Where does the time go, in numbers?

Take a hypothetical business with 300 supplier invoices a month. Before automation, the full cost per invoice is about 12 minutes: 5 to key and code it, 4 spent chasing and recording approval, and 3 on supplier queries, statement checks and payment preparation. That is 60 hours a month.

After automation, assume half the invoices go through with no one touching them except the approver’s one click. The other half need about 6 minutes each for exceptions, coding checks and queries. That is 15 hours a month. Most of the saving comes from approvals and queries, not from data entry.

These figures are illustrative. Time your own process for two weeks first, including the waiting time, and use the calculator on this page with your numbers.

Where must people stay in control?

  • Keep supplier set-up and payment approval with different people.
  • The system prepares the payment proposal. A person approves and releases the payment run in the bank.
  • Supplier query agents answer from the ledger only: invoice received, approved, scheduled, paid. They do not promise payment dates outside the run.
  • Review a sample of automatically coded invoices each month, and every invoice from a new supplier.

For more on approval points, see the human-in-the-loop guide. For budgeting, see the workflow automation cost guide.

Common questions

Is AP automation worth it for a business with 100 invoices a month?

Possibly, but start with what your accounts package already does. At that volume, built-in bill capture and a clear approval rule may be enough. Custom automation makes sense when approvals are slow, you match to purchase orders, you have several entities, or supplier queries take real time. Measure where the hours go first.

Can an agent answer supplier payment queries?

Yes, for status questions. It reads the ledger and replies with whether the invoice was received, approved, scheduled or paid, and the payment date. It should not negotiate, promise early payment or discuss disputes. Those go to a person. Restrict it to the supplier’s own invoices, identified by their email domain or account.

Do we need to change accounts package for e-invoicing?

Not necessarily. Many packages are adding e-invoice support, often through the Peppol network. Ask your supplier for their plan and dates before November 2028, when Revenue expects all businesses to be able to receive e-invoices. Revenue’s implementation pages are the reference; check them for changes.

How does it handle construction subcontractor invoices?

It treats them as a separate path. The system recognises subcontractors in RCT, holds payment until a deduction authorisation is in place, and records the deduction on the payment. The payment notification itself is made on ROS by your staff or accountant. The automation reminds and checks; it does not file with Revenue.

Sources

  1. Revenue: eInvoicing implementation phases
  2. Revenue: Information required on a VAT invoice
  3. Revenue: Relevant Contracts Tax for subcontractors
  4. Revenue: Keeping VAT records

We last checked these sources on 19 November 2026. Rules, fees and prices change. Check the source before you act.

Bring us the task.

Tell us what happens today, which tools are involved and where it goes wrong. On a free 30-minute review, we’ll work out whether an agent, an automation or neither is the right fix, and what a sensible first release would be.

Start a project.

Two people on a sofa with laptops, planning a project beside a whiteboard of sticky notes

Book a call or send us a message. We read everything.

tash@neu.ie
Working with teams in Ireland and worldwide.

Get in touch

Free 30-minute AI review.